15
Pay attention to
protect DB15 cable and
avoid long-time friction,
which may leads
short-circuit or open-
circuit!
Figure 3. 7
Note
：
○
1
：
Drill proper holes on anti-vibration frame and helicopter. Then fix the anti-vibration frame to
the helicopter.
Attention：
Check the bearing capacity of neoprene isolator regularly to see if it has the
tendencies of weakness or aging, in order to replace it in time.
3.1.2 Adapter installation
1.
【Position Choice of Adapter】：
1)
The minimum distance between the Adapter and the engine (gasoline
engine or electric motor) must be 10cm at least, or normal work will be
disturbed.
2)
Arrange a proper position for Adapter installation to reduce the using of the
extension wire because there are many links between Adapter and RC
receiver, servo respectively.
3)
Do not fix the Adapter to the helicopter after choosing a proper position. Fix it
after all the adjustment.
2.
【 Connection between Main Controller and
Adapter】
：
Connect them by DB 15 cable (Figure
3. 8), which matches DJI XP3.1. The clasp of DB
15 cable must be locked (Figure3. 9 DB15 open
status) (Figure3. 10 DB15 closed status). The
looseness of DB15’s clasp must be avoided.
