16
The routing should not be pulled to tightly (Figure 3. 11) longer wire in advance
is preferred and. Do not constrain the DB15, which links to the port of the Main
Controller. Keep it reflex to avoid affecting the attitude of the Main Controller
or reducing the efficiency of isolators. The recommended way is shown in
Figure 3. 12
Figure 3. 8
DB15 Cable
Figure3. 9 Open Status
Figure3. 10 Closed Status
Figure 3. 11 Figure 3. 12
3.
【Connection between RC Receiver and Adapter】：Fix the RC receiver first.
And then connect Adapter’s input wire to the RC receiver according to the
label on them (Figure 3. 13) and the power polarity. No external power supply
is needed for RC receiver, because its power has been supplied by Adapter
directly (Figure 3. 14).
Figure 3. 13 Figure 3. 14
Definitions of the RC receiver input wires are shown as follow:
Label
T
A
E
R
U
○
1
P
G
○
2
X
Definition
T
HRO
A
ILE
E
LEV
R
UDD A
U
TO
P
ITCH
G
YRO
AU
X
