Dixie Narco DN 2145, Technical Manual

Page: 14 / 89

14
SERVICE MODE MENU ITEMS
SERVICE MODE
Enter SERVICE MODE by opening the service door
and pressing the Service button once. The display
will read “
SERVICE MODE”. The following choices
are now available:
NEXT ITEM - Press key “A”
CASH BOX - Press key “B”
Shows the amount inserted into the bill validator and
the change diverted to the cash box from the coin
mechanism since the last CLEAR TOTALS or
MASTER RESET. To view the cash box totals, press
the letter “B” on the keypad and the display will scroll
“CASH BOX”, then display #.##.
Press the “CLR” key to return to “SERVICE MODE”
or press the “A” key to advance to the next menu
item below.
SALES - Press key “C”
Shows total sales since last CLEAR TOTALS or
MASTER RESET. This total includes change not
diverted to the cash box and still being held in coin
mechanism escrow tubes To view the total sales
press the letter “C” on the keypad and the display
will scroll “SALES”, then display #.##.
Press the “CLR” key to return to “SERVICE MODE”
or press the “A” key to advance to the next menu
item below.
DISPLAY TEMP (if temperature sensor hardware
kit is installed) -
Press key “D”
Shows the cabinet temperature in degrees Celsius
or degrees Fahrenheit. Press the letter “D” on the
keypad. The display will scroll ”Display
Temperature”. Pressing the letter “C” on the keypad
will display the temperature in degrees Celsius.
Pressing the letter “F” on the keypad will display
temperatures in degrees Fahrenheit. If no sensor is
installed, “TEMP SEN” will appear on the display.
NOTE: THIS SETTING DOES NOT CHANGE THE
APPEARANCE OF THE DIGITAL DISPLAY IN THE
STANDBY OR OPERATION MODE.
Press the “CLR” key to return to “SERVICE MODE”
or press the “A” key to advance to the next menu
item below.
SET COOL DOWN - Press Key “E”
Allows the service technician to set the cool down
period for each selection that is warm after
restocking. This feature may be set on an individual
item, a complete tray, or the entire machine. Once
set, the cool down period duration is the time
entered by the service technician in SET COOL
TIME, or the default time of 240 minutes if no time
was entered. Press the letter “E” on the keypad and
display will scroll “SET COOL DOWN”. Press the “*”
key on the keypad and the display will read “ITEM”.
There are now three choices:
1. Pressing the “*” key will place the entire
machine in cool down.
2. Pressing a tray selection followed by “*” will
place that tray in cool down. For example,
pressing “A*” will place the “A” tray in cool
down.
3. Pressing an item selection will place just that
item in cool down. For example, pressing
“A1” will place that selection only in cool
down.
After making any of the above selections, an audible
tone will be heard and the display will change
momentarily to “OK” then back to the price.
The larger of the settings will carry a priority in the
programming sequence. For example, if you first
programmed “A1” for cool down then pressed “A*”,
the “A*” setting would take precedence. Conversely,
if “A*” was programmed first followed by “A1”, the
“A*” setting would still take precedence but the “A1”
selection will be disabled from the cool down cycle.
After the COOLDOWN is set and the vender is
returned to the operating mode, the display will
prompt the consumer via the digital display as to
how many minutes remain in the cool down cycle
(for example, the A tray was programmed for cool
down and the customer tried to purchase item A6.
The display would read “product cool in ###
minutes” were ### represents the time remaining for
the cool down cycle.
Press the “CLR” key to return to “SERVICE MODE”.
CLEAR TOTALS
-
Press key “F”
Allows the service technician to clear totals in CASH
BOX, SALES, NUMBER SOLD, DOOR OPENINGS,
POWER OUTAGES, and SALES BY COLUMN.
Press the letter “F” on the keypad and the display
will scroll “CLEAR TOTALS”. Press the “*” key, the
display will read OK momentarily and an audible
tone will be heard. The totals are cleared and the
display returns to “SERVICE MODE”.
NUMBER SOLD - Press key “1”
Shows the total number of items sold since the last
CLEAR TOTALS OR MASTER RESET. Press the
number “1” on the keypad and the display will scroll
“NUMBER SOLD”, then change to ##.
Press the “CLR” key to return to “SERVICE MODE”
or press the “A” key to advance to the next menu
item below.
ENABLE ITEM
-
Press key “2”
Allows an individual selection, a complete tray, or
the entire machine to be enabled or disabled. This is