Dixie Narco DN 2145, Technical Manual

Page: 11 / 89

11
INITIAL PROGRAMMING
DATE/TIME
Proper setting of items such as Happy Hour and Not
Available Times, as well as obtaining information
regarding Door Openings, Power Outages, etc.
depend on a correct DATE/TIME setting. This setting,
while set at the factory, should be checked and
changed if necessary. Enter “SETUP MODE” by
opening the service door and pressing the Service
Button 3 times. Press the number 5 key; the day,
date, and time will scroll across the display in the
following format: SUN 09/08/02 1330. To change
press the “*” key and the display will read “SAT”. Use
the “A” key to scroll through the days. When the
desired day is displayed, press the “*” key. The
display will read “MONTH”. Enter the 2 digits for the
month and press the “*” key. The display will read
“DAY”. Enter the date (2 digits) and press the “*” key.
The display will read “YEAR”. Enter the year (last 2
digits) and press the “*” key. The display will read
“HOUR”. Enter the hour (00 – 23) and press the “*”
key. The display will read “MIN”. Enter the minutes
(00 – 59) and press the “*” key. The date/time is now
set and the display will return to “SETUP MODE”.
REGULAR PRICES
Allows the setting of regular prices for an individual
item, a complete tray, or the entire machine. Factory
setting is $99.95.
Press the number “7” on the keypad and the display
will scroll “SET REGULAR PRICES”. Press the “*” key
and “$00.00” will be displayed. Prices are entered
using the numbers on the keypad and will shift in from
the right as numbers are pressed. Once the desired
price is showing on the display, use one or all of the
options listed below for setting the price to the desired
selection:
1. All selections. Press the * key after entering
desired price and all selections in the vender
will now be set
2. One tray. Pressing the letter of the shelf
followed by the * key will price that shelf to a
single price. For example, to price the A shelf
for $1.25, first dial in the price then choose A
followed by *.
3. Single selection. Press the desired selection
number or numbers corresponding to the
selections that require changing.
Priority will be given to the higher ranked method. For
example, If one price on the A tray was set to $1.50
using option 3 above and you wish to change the
remaining selections on that tray using option 2, the
pricing for the entire tray would take precedence.
Conversely, if the price was set using option 2 first
followed by the single selection using option 3, the
pricing for the remainder of the shelf would remain
and the new price for the single selection would
change to the new value.
Press the “CLR” key to return to “SERVICE MODE”.
POINTS TO REMEMBER:
•
Prices entered must not exceed the “MAX
CREDIT” set in the system’s program.
•
DO NOT press the “*” key when setting prices
for individual selections.
HAPPY HOUR TIMES (not available 030.81 & higher)
Password protected. Before entering or changing this
setting you must enter the password. To set Happy
Hour Times enter the “SETUP MODE” by opening the
service door and pressing the Service Button 3 times.
Press the number 2 key; the display will scroll “SET
HAPPY HOUR”. Press the “*” key and the display will
show ”PW”. Enter the password and the display will
flash “OK”. Then “HH START TIME 00 00” will scroll
across display.
POINTS TO REMEMBER:
•
Before setting Happy Hour times and days, it
is recommended you check the DATE/TIME
settings.
•
All times entered must be in 24 hour format.
HAPPY HOUR PRICES (not available 030.81 &
higher)
To set Happy Hour Prices enter the “SERVICE
MODE” by opening the service door and pressing the
Service Button once. Press the number 8 key; the
display will scroll “SET HAPPY HOUR PRICES”.
Then “$0.00” will be displayed. As the prices are
entered the numbers will shift in from the right on the
display. When the desired price is displayed it may be
assigned to an individual selection, an entire tray
(shelf), or to all selections in the machine. When
setting prices for individual selections DO NOT press
the “*” key. The “*” key is only used to assign a price
to an entire tray or to all selections in the machine.
When setting one price for an entire tray the “*” key is
pressed after designating the tray (display reads
$1.00 A), when the “*” key is pressed the display will
read “$1.00 A” momentarily, then will return to just the
price. When setting one price for an entire machine
the “*” key is pressed after entering the price (display
reads $1.00), when the “*” key is pressed the display
will read “$1.00 **” momentarily, then will return to just
the price. When setting prices for individual selections
the tray and column (A1) is entered following the
price. As soon as the column number is pressed, the
price and selection will be displayed momentarily
(“$1.00”), then the display will return to just the price.
Always check the setting for “MAX CREDIT” before
setting prices (not applicable to International
machines).
POINTS TO REMEMBER:
•
Prices entered must not exceed the “MAX
CREDIT” set in the system’s program.