Divus OPENDOOR, Manual

Page: 95 / 111

DIVUS OPENDOOR manual 95
8.2.2 OPENDOOR COVER
The OPENDOOR Covers can be assembled into with the fitting OPENDOOR Frame; cover and frame result in a
single surface. The OPENDOOR Cover has all cut-out for mounting the related OPENDOOR modules. The different
OPENDOOR Cover variants have of course different cut-outs. Basically 3 variants are available with cut-out for
OD-Cam or without:
• Cut-out for OD-Push_LED (1 ring button without nameplate) and OD-Sip Plus
• Cut-out for OD-BellModule2 (2 ring buttons with nameplate) and OD-Sip Plus
• Cut-out for OD-BellModule4 (4 ring buttons with nameplate) and OD-Sip Plus
Additionally there are covers for single modules, which can be combined with OPENDOOR
Frames for 1 module or which can be mounted in the fourth cut-out of an OPENDOOR frame
for 4 modules:
• Cut-out for OD-Keypad (Only in combination with OD-Sip Plus)
• Cut-out for OD-Transponder or OD-Presence (it’s the same cut-out)
• Cut-out for fingerprint
Finally there is one special cover which has no cut-out for OD-Cam, but needs a frame for 3 modules:
•
Cut-out for OD-Sip Plus, OD-Push_LED and fingerprint
The OPENDOOR Cover has on his back M4 threated bars through which it can be mounted into the OPENDOOR
Frame. The OPENDOOR Cover are available in stainless steel or in normal steel painted in the whished RAL colour.
The dimension of a frame for 3 modules follows. All other frames have the same dimension, only the height of
the frames changes from on to the other by 110mm (1 module: 150mm, 2 modules: 260mm, 3 modules: 370mm
and 4 modules: 480mm); also the vertical distance of the holes changes from frame to frame by 110mm (1
module: 126mm, 2 modules: 236mm, 3 modules: 346mm and 4 modules: 456mm).