Divus OPENDOOR, Manual

Page: 34 / 111

DIVUS OPENDOOR manual 34
CALL OPTIONS
The parameters for a generic call and a call’s setup can be found here:
Max. call duration: Duration in minutes to restrict the single calls; the countdown starts when a call is accepted.
The call is ended after the given time. When set to “00” the call duration is not restricted (endless).
Timeout connection attempt: When the OD-Sip Plus is calling a client or a group of clients and no one answers,
this timeout will limit the time for the connection attempt. The timeout begins to count down as soon as the call
starts. When the time is over OD-Sip Plus stops calling and returns to idle mode.
Redial attempts: If a redial function is needed, you may set the number of attempts here.
Delay between redial attempts: If the redial function is active and the callee should be occupied or not available,
the OD-Sip Plus waits for this time (seconds) before the next attempt.
Mute time after DTMF detection: When a second DTMF tone is detected, the speaker of the OD-Sip Plus is
muted. If the DTMF code is entered correctly, the speaker is activated again after the acknowledgement. If a
wrong DTMF code is sent to the OD-Sip Plus the speaker remains muted until the mute time is over.
Call chain cycles: When in the call destinations list the entries are grouped using the group ID field, calls inside
the group are handled using call chains. All numbers with the same group ID belong to the same call chain group:
if the number called is currently not available/occupied, the next number in the chain group is called. The chain
is interrupted when one participant answers or when all participants were called. If you set this number to a value