Divus OPENDOOR, Manual

Page: 102 / 111

DIVUS OPENDOOR manual 102
The soldering lags „S1“ to „S4“ can be used to connect the ring buttons to OD-BellModule. This soldering lugs are
connected directly to the related connectors on the removable screw terminal. From these connectors the ring
buttons can be connected to the OD-Sip Plus; the lower lug is always connected to ground.
9.3.3 DIMENSION AND CUT-OUT
The cut-out shown on the right side is shown from behind (back of OPENDOOR Cover or inner side of mailbox), it
means the OD-BellModule would be putted on the cut-out like shown on the left side and fixed with 2 M4 nuts.
Before the module can be mounted the plexiglas inlays for the nameplates must be pressed into the cut-outs.
The milled elevation must be pushed inside the cut-out; for this purpose the cut-out must be as exact as possible.
Once all plexiglas inserts are pushed into the cut-out the OD-BellModule can be mounted.