v
DiViS
3
FCC COMPLIANCE STATEMENT
A CLASS A computing device subject to certification by the Commission shall be identified
pursuant to Par 2.925 et Seq of the chapter. In addition, the label shall include the following
statement:
Where a device is constructed in two or more sections connected by wires and marked
together, the statement specified in this Section is required to be affixed only to the main
control unit.
The user’s manual or instruction manual for the EUT shall contain the following statement or
equivalent.
Caution: Changes or Modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
If the EUT requires accessories such as special shield cables and/or connectors to enable
compliance with emission limits, the instruction manual for the EUT shall include appropriate
instruction on the first page of the text concerned with the installation of the device that
these special accessories must be used with the device. It is the responsibility of the user to
use the needed special accessories supplied with the equipment.
For a CLASS A digital device or peripheral, the instruction furnished the user shall include
the following or Similar statement placed in a prominent location in the text of the manual.
Note: This equipment has been tested and found to comply with the limits for a CLASS a
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment, This equipment Generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of the this equipment in a
residential area is likely to cause harmful interference in which cause the user will be
required to correct the interference at his own expense.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,
including interference that may cause undesired operation.
