v
DiViS
19
4-4. Display Setup
1. SEQ.DWELL
Select dwell time between 1 to 60 seconds for the switching interval under sequential display
mode. Press Left/Right Direction buttons to decrease/increase dwelling time.
2. SPOT.DWELL
Select dwell time between 1 to 60 seconds for the switching interval on SPOT video output,
which displays a single channel view of all connected video channels by sequentially switching. Press
Left/Right Direction buttons to decrease/increase dwelling time.
3. TIME/DATE
OSD
Select ON to show the current time and date on the main display and OFF to hide. Note that
this setting will not affect to the time and date of recorded images.
4. CAM NO OSD
Select ON to show the camera number on the main display and OFF to hide.
5. VIDEO LOSS OSD
Select ON to display “VIDEO LOSS” with blue screen for disconnected input(s). If set to
OFF, disconnected channels will be displayed black.
6. POP-UP
DISPLAY
Select number for the period in second to allow pop-up display by event trigger, such as
motion or alarm. Set to OFF to turn off pop-up display. If more than one channel needs to be popped-up at the
same time, channels would be popped up by turn, interval of 3 seconds.
7. ADJUST
CH
Select a channel to apply PRIVATE and CH QUALITY SET.
8. PRIVATE
Turn on or off private feature on the selected channel. The channel with private ON will display black
screen.
9. CH QUALITY SET
Adjust brightness, contrast, hue, and saturation on the selected channel. Once selected,
each attributes can be adjusted between 1% and 99%.
10. QUALITY RESET
Reset quality controls including brightness, contrast, hue, and saturation to the factory initial
values.
