Divis CHSM48016, Installation And User Manual

Page: 27 / 41

v
DiViS 27
www.DiViSDVR.com
4-11. Camera Setup
1. CAMERA NO Select a camera to adjust ID or PTZ settings below.
2. CAMERA ID Change Camera ID to be displayed for the selected channel. Once selected, On-Screen Keyboard
will be available.
3. PTZ TYPE Select a type of PTZ protocol if applicable. In order to control PTZ cameras from the DVR system
and remote, it is necessary to properly set this section. DiViS CHSM48016 supports following protocols: DiViS-
D, Panasonic, Pelco-D, Pelco-P, Techwin, Niko, DRX502A (DSC230s), KRE 302 (301), GC755NP, TOA (CC)
554, RAS716(LS), LPF100, KD, INTR-M, LILIN MLP2 and so on.
4. PTZ ID Configure the camera ID between 0 and 255. This ID needs to match with the physical ID set on the
camera, mostly by dip switches.
5. PTZ BAUD RATE Baud rate for the camera connected. Ranges from 2400 to 19200 BPS and needs to match
with the actual camera setting.
6. PAN/TILT SPEED set pan/tilt speed between 0 and 10, higher number for faster movement.
7. KBD ID Configure the keyboard ID between 0 and 16. This ID needs to match with the physical ID set on the
keyboard.
8. KBD BAUD RATE Baud rate for the keyboard connected. Ranges from 2400 to 19200 BPS and needs to
match with the actual keyboard setting.