background image

 
 
 

v                                                                                                                                                                                             

DiViS

 

10

www.DiViSDVR.com 

 

 

 

3-3. Front Panel Description 

 

 

 

 

 

 

 

 

 

 

1. CD 

Tray: 

This place can hold various types of backup media. A DVD rewritable drive is installed at default. 

2.  Jog and Shuttle:

 Jog and shuttle enables user to operate DVR easier in handling such as fast forward, fast 

reverse playback and one frame movement in still picture.     

3. LED 

Indicators 

4. Channel 

Selection 

Buttons 

These buttons, from Ch. 1 to Ch. 16, allow user to select a specific channel to be 

displayed on the monitor. 

 

 

 

 

5. Function 

Buttons 

       

 

1) FUNC 

        This button enables additional features for other buttons when combined.   

  FUNC    + ENTER:

 Display

 

system information (video format, HDD info, IP Address, version, etc.). 

  FUNC    + MENU    :

 Opens interface to select a channel for audio output. 

 

FUNC        + ESC            : 

Turns on/off motion detection display, for channels with motion recording. 

Power: 

LED turns on red when power is on.

 

Network:

 LED turns on green when a connection established remotely. 

Copy:

 LED turns on green while copying data to CD, DVD or USB device. 

Record:

 LED turns on red while recording images. 

Key Lock:

 LED turns on yellow if Lock function is enabled. 

Remote Controller Receiver:

 sensor input window for remote controller. 

Summary of Contents for CHSM48016










































Reviews: