![Divis CHSM48016 Installation And User Manual Download Page 13](http://html.mh-extra.com/html/divis/chsm48016/chsm48016_installation-and-user-manual_2510885013.webp)
v
DiViS
13
2. 16 Ch. Loop through Outputs:
16 channels of composite video outputs with BNC connectors that provide
loop-through video outputs. Outputs may be connected as inputs to other video equipments if required.
3. 16 Ch. Audio Inputs (RCA)
16 channels of unbalanced audio signal inputs with RCA connectors. The audio
input must be an amplified audio source, such as amplified microphone.
4. 2 Ch. Audio Outputs (RCA)
2 channels of identical audio outputs. It is required to be connected to speaker,
headset or any other equipment as an audio input.
5. 3 Ch. Composite Video Outputs and 1 S-Video Output
Two composite outputs (MON 1 and MON 2) and S-
Video output provide main video output for live display and search. They are same video output. Another
composite output (SPOT) provides a single channel spot monitor output that displays all connected video inputs,
one at a time, sequentially.
6. Power
Input
Connect power supply (DC 12V/5.8A).
7. RS232C
To be utilized for future options.
8. VGA
Outputs
Provide RGB video signal that is identical with MON 1, MON 2, and S-Video outputs.
9. Alarm
Inputs
16 alarm inputs to connect with external devices to trigger various DVR events. Mechanical or
electrical switches can be wired as inputs. The threshold voltage is 4.3V, and the signal should be stable at
least 0.5 seconds to be detected.
To make secure connections on the Alarm Connector Strip, press and hold the button and insert the wire in the
hole below of connector pin. After releasing the pin, pull gently on the wire to make certain it is connected. To
disconnect a wire, press and hold the connector pin above the wire and pull out the wire.
10. Relay Outputs
4 relay outputs to send normally open (NO) or normally closed (NC) signal to external devices.
11. RS485
Connect to PTZ cameras to control through DVR system.
12. Ethernet Port (RJ-45)
Connect to the network to allow remote connection over the network. Remote
connection allows users to access live monitoring, searching and other available functions via the network.