v
DiViS
22
3. MOTION
AREA
CH
Select a video channel to set motion area to selectively detect motion.
4. MOTION
AREA
Assign area to detect motion from 11 (H) x 10 (V) grid.
ENTER:
Toggle among direction mark, add (+), and remove (-) on the circled area above. Once it is set to add
(+) mark, a currently selected segment will be marked to detect motion. A segment will be deselected if it
changes to remove (-) mark.
Direction Buttons:
Move focus to the proper direction. While the focus is set to direction mark, the focus only
moves to the direction that is pressed. If the focus is set to add (+) / remove (-) mark, the focus will move to the
proper direction and a segment will be selected or deselected respectively.
:
Change the channel to set motion area from Ch. 1 to Ch. 16
ESC:
Exit from motion area setting and returns to the event setup.
Note: While selecting segment(s) for motion area
Func
(
F1
on remote controller) toggles selection as following:
•
FUNC + 1:
Select all
•
FUNC + 2:
Deselect all
•
FUNC + 3:
Reverse selection
