v
DiViS
20
4-5. Recording Setup
1. STOP
KEY
Select DISABLE or ENABLE for the
REC/STOP
button. In case of manual recording, manual
recording can be started and stopped by the
REC/STOP
button. This STOP KEY protects the system from
unauthorized interruption of recording. While it is set to DISABLE, recording can not be stopped by REC/STOP
button.
2. REC
SETTING
Configure recording conditions as below:
Resolution:
Select from FULL (4 CIF, D1), HALF (2
CIF, Half D1), or NORMAL (CIF)
Quality:
Select from VERY LOW, LOW, STANDARD,
HIGH, and VERY HIGH
FPS:
Select from a recording frame rate from 1 to 30
on NTSC (1 to 25 PAL).
REC
: Select from MANUAL, SCHEDULE, EVENT,
OFF for recording type.
Audio
: Select ON or OFF for audio recording
Lock:
Select ON or OFF to prevent overwriting for the
specific channel. This lock overrules overwriting under
HDD setting. Therefore it must be used for a short period of time with caution. LOCK must be turned off to
prevent recording interruption.
Note:
Available FPS will be automatically adjusted according to video resolution setting.
Available Recording Frame Rate
Resolution
(All 16 Ch.)
NTSC PAL
CIF
Max. 480 Fps
Max. 400 Fps
2 CIF (Half D1)
Max. 240 Fps
Max. 200 Fps
4 CIF (Full D1)
Max. 120 Fps
Max. 100 Fps
* CIF:
320 x 240 in NTSC, 320x 288 in PAL
