manualshive.com logo in svg

Dinolift DINO 120T, Operating Instructions Manual, Page: 63 / 65

Share
Download
Dinolift DINO 120T Operating Instructions Manual Download Page 63

63

9. 

CHANGE OF OWNER

For the owner of the lift:

If you have purchased a used DINO lift from some other than the manufacturer, please post 

your details to the manufacturer using the form on this page, and send it to:

   [email protected] 

This information makes it possible for us to provide you with the safety bulletins and other 

campaigns relevant to your machine.

Note! It is not necessary to inform about a rented machine.

Machine model:  

DINO  _______________

Serial number:  

_______________

Previous owner:   _____________________________________________

   Country: 

_________________________________________

Date of purchase:   _______________

Current owner:  

______________________________________________ 

   Address: 

___________________________________

     ___________________________________

   Country: 

 ___________________________________

Contact person

Name and position in the company: 

 

___________________________________

   Telephone: 

___________________________________

   E-mail: ___________________________________

Summary of Contents for DINO 120T


































































Reviews:

No comments