Dinolift DINO 120T, Operating Instructions Manual, Page: 40 / 65

40
Operating instructions
•
DINO 120T
•
120TB
5.3.2. Using the driving device
The hydraulic driving device is intended for moving the lift within the work area if the towing
vehicle cannot be used.
During transfer in rough terrain, always try to position yourself higher than the
machine.
1. Turn the selector switch 1 to position “LCB”.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
2. 120T: Start the electric motor.
In 120TB, selecting the movement speed will start the engine automatically.
3. Make sure that the platform is in the transport position and the outriggers are lifted in the
upper position
4. Make sure that the mains cable is long enough to cover
the whole travel distance – or that the cable has been
disconnected.
5. Switch the driving device to the drive position.
6. Release the parking brake
7. Turn the speed selector switch, and drive the unit using the
controls for the driving device.
4CB4054
Koko 243x339 mm
Nimike 4CB4054
Logo muutettu uudeksi 29.5.2015 VR
Nopeusvalintasymbolit muutettu 7.3.2016 LKö
V
10B
10F
10L 10R
10F Drive to the front
10B Drive to the rear
10F + 10R Driving forward to the right
10F + 10L Driving forward to the left
10B + 10R Driving backward to the right
10B + 10L Driving backward to the left
Note! The movements of the boom and the platform will stop as soon as the speed selector
switch or the selector switch for the movement is released.
DANGER
WARNING
CAUTION
NOTICE
Do not drive the jockey wheel into obstacles or potholes. If one of the wheels bumps
into an obstacle, the lift may turn abruptly.
After the driving:
• Apply the parking brake.
• Disengage the transmission.
• Disconnect the driving device from the tyre.