Dinolift DINO 120T, Operating Instructions Manual

Page: 53 / 65

53
Always lubricate the lift and apply a protective grease film immediately after the washing.
The lift must always be subjected to a special inspection after an exceptional event. Special
inspection is required if the lift has been damaged in a manner,which may affect its load-
bearing capacity or safe operation. Consult the maintenance manual for more detailed
instructions.
DANGER
WARNING
CAUTION
NOTICE
Under demanding conditions where moist, corrosive substances or corrosive climate may
speed up the deterioration of the structures and induce malfunctions, the maintenance
intervals must be shortened, or the influence of corrosion and malfunctions must be reduced
by using appropriate protective means.
DANGER
WARNING
CAUTION
NOTICE
If the lift is equipped with a petrol-driven power pack, then carry out, in addition to the
normal maintenance routines, also the service measures prescribed in the operating and
service instructions for the power pack. Refer to the separate service manual for the power
pack for instructions.
20 Driving device C G I
21 Lights C C C I
22 Hydraulic oil C C C D
23 Hydraulic hoses, pipes and fittings C C C I
24 Condition and attachment of battery, electrical devices and
wiring
C C I
25 Hydraulic pressure I
26 Condition of safety limit switches C
27 Operation of safety limit switches C C C I
28 Load holding and load regulation valves C C
29 Platform levelling system C C C
30 Platform control devices C I
31 Emergency descend, emergency stop and
sound signal
C C C C
32 Labels, machine plates and instruction manuals C C C C
33 Test loading I
34 Corrosion protection C D
35 Special inspection D
Maintenance measures A B C D E