3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02_16.03_EN_U
68
OUTPUT AXLE WEIGHING REPORT
- Programmable printouts -
If the input/output function is enabled, through the following print functions, it is possible to create a report of the output axle
weighing made, by printing a
heading, the weight of each weighed axle.
See section 13.3 for the procedure to execute the output weigh.
TOTALIZATION FIRST AXLE
- Programmable printout -
The first axle totalization (manual with
F7
key or automatic depending on the totalization mode) causes the printing of the
format linked to the S.F.12 function (function used also in the input axle weighing).
TOTALIZATION NEXT AXLE
- Programmable printout -
The next axle totalizations (manual with
ENTER
key or automatic depending on the totalization mode) cause the printing of
the format linked to the S.F.13 function (function used also in the input axle weighing).
AXLE TOTAL AND OUTPUT AXLE WEIGHING END
- Programmable printouts -
The end of the axle totalization (manual with
C
key or automatic depending on the totalization mode) causes the printing of
the format linked to the S.F.14 function (function used also in the input axle weighing) and then of the format linked to the
S.F.07 function.
REPORT OF THE INPUT/OUTPUT WEIGHING WITH PRESET TARE
- Programmable printouts -
If the input/output function is enabled and a preset tare has been set, through the following print functions, it is possible to
create a report of the axle weighing made, by printing a heading, the weight of each weighed axle and the weight difference
between the total weight and the preset tare.
See section 13.3.6 for the procedure to execute the input/output weigh with preset tare.
TOTALIZATION FIRST AXLE
- Programmable printout -
The first axle totalization (manual with
F7
key or automatic depending on the totalization mode) causes the printing of the
format linked to the S.F.12 function (function used also in the input axle weighing).
TOTALIZATION NEXT AXLE
- Programmable printout -
The next axle totalizations (manual with
ENTER
key or automatic depending on the totalization mode) cause the printing of
the format linked to the S.F.13 function (function used also in the input axle weighing).
AXLE TOTAL AND END OF THE IN./OUT. AXLE WEIGHING WITH PRESET TARE
- Programmable printouts -
The end of the axle totalization (manual with
C
key or automatic depending on the totalization mode) causes the printing of
the format linked to the S.F.14 function (function used also in the input axle weighing) and then of the format linked to the
S.F.05 function.
CUSTOMER TOTAL
- Programmable printout -
By pressing the
2nd F
key followed by
F1
,
the CUSTOMER TOTAL is printed and then cleared as well as the printing of the
format linked to the
S.F.08
function. Please find below the default printout:
DESCRIPTION1
DESCRIPTION2
DESCRIPTION3
TOTAL INPUT WEIGHT = net weight of the quantity which has entered in the factory (in other words the sum of the net
weights greater than zero [so with the input weight greater than the output weight],
of all the pairs and of the single weighs
carried out)
.
TOTAL OUTPUT WEIGHT = net weight of the quantity which has left the factory (in other words the sum of the net weights
less than zero [so with the input weight less than the output weight],
of all the pairs and of the single weighs carried out)
.
NET TOTAL = the net of all transactions (TOTAL OUTPUT WEIGHT minus the TOTAL INPUT WEIGHT).
WEIGHS TOTAL = number of weigh pairs (input weigh with relative output weigh) and of all the single weighs carried out.