3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02_16.03_EN_U
58
-
Transit with the first axle of the vehicle on the scale in the limits of speed setted in the
DYN.CFG >> SPEED
,
avoiding braking while transiting on the scale.
-
The axle will be acquired automatically if:
1)
The weight is greater than the set minimum weight of the axle setted in
<<Min.Wei>>
step.
2)
The detected weight is within the parameters of the dynamic weigh, which are set in
<<DIN.CFG>>
,
(TECH.MAN.REF.)
.
-
After the weight of the first axle is acquired, the indicator emits a sound and displays for an instant the following
message:
3590E
LED display
LCD display
CPWE
[In which:
YYYYYY
is the acquired weight value, with unit of measure]
-
Then the acquired weight blinks for a few seconds and the indicator executes the printout (if set in the corresponds
print formats):
-
After that the weight of the first axle has been successfully acquired, when the weight goes below the
<<Min.Wei>>
step the indicator waits for the second axle, the time setted in the
<<tiME W>>
step:
3590E
LED display
LCD display
CPWE
[In which:
XXXXXX
is the current weight on the scale
YYYYYY UM
is the acquired overall weight value with unit of measure]
is an advancement bar which becomes colored in proportion to the set time interval between
cycles]
-
Transit with the first axle of the vehicle on the scale in the limits of speed setted in the
DYN.CFG >> SPEED
,
avoiding braking while transiting on the scale.
-
The indicator acquires automatically the axle weight, shows the acquired value and asks again for the following axle
weigh, and then for all the axles which one wants to totalize.
-
The cycle ends when the weight is not acquired during the time interval between cycles, or when
F9
key is pressed;
after that the display shows an instant:
AXLES: 1
TOT: YYYYYY UM o
tot
AXLES: 1
TOT: YYYYYY UM o
XXXXXX
WAIT AXLE 2
TOT: YYYYYY UM o
XXXXXX
WAIT AXLE 2
TOT: YYYYYY UM o