3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02_16.03_EN_U
36
[In which:
XXXXXX
is the acquired weight value blinking for about 2 seconds, then the current weight on the scale]
-
After that, the indicator waits for the following axle.
-
Drive and stop the next axle of
the vehicle on the scale.
-
Wait a few instants for the weight stability.
-
By pressing
ENTER;
the indicator acquires the axle weight, prints the acquired value and asks again for the following
axle weigh, and then for all the axles which one wants to totalize, or press
C
to end the weigh; the indicator will
display for an instant:
3590E:
LED display
LCD display
CPWE:
-
By pressing
C
to end the weigh; the indicator will display for an instant the figures below.
-
Then the indicator executes the cycle end printout, and then displays the total of the axles in the weight section (see
section 5) for a few seconds:
3590E:
LED display
LCD display
alternatively to
CPWE
alternatively to
.0
[In which:
XXXXXX
is the acquired overall weight value]
-
At this point, it returns to the status of waiting to acquire the first axle (see first point).
WEIGH AXLE 3 ?
ENTER=YES C=NO
total
WEIGH AXLE 3 ?
ENTER=YES C=NO
XXXXX
X
1
CUS MAT VEH
PT:
0 kg
1
CUS MAT VEH
PT:
0 kg
total
CUS MAT VEH
XXXXXX
CUS MAT VEH