3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02_16.03_EN_U
39
-
Drive and stop on the next axle of
the vehicle on the scale.
-
Wait a few instants for the weight stability; the indicator acquires the axle weight, prints the acquired value and asks
again for the following axle weigh, and then for all the axles which one wants to totalize.
-
The cycle ends when the weight is not acquired during the time interval between cycles, or when
F9
key is pressed;
after that the display shows an instant:
3590E
LED display
LCD display
CPWE
-
Then the indicator executes the end cycle printout, and then displays the total of the axles for a few seconds:
3590E
LED display
LCD display
alternatively to
CPWE
alternatively to
[In which:
XXXXXX
is the acquired overall weight value
YYYYYY UM
is the acquired overall weight value with unit of measure]
-
At this point, it remains in this status (in this visualization), until you’ll press the
F10
key, or until new values of
weights are available for the weighings. After this it returns to the status of waiting to acquire the first axle (see first
point).
total
WAIT AXLE 3
TOT: YYYYYY UM
WAIT AXLE 3
TOT: YYYYYY UM
AXLES: 2
TOT: YYYYYY UM
AXLES: 2
TOT: YYYYYY UM
total
AXLES: 2
TOT: YYYYYY UM
XXXXXX
AXLES: 2
TOT: YYYYY UM