3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02_16.03_EN_U
10
./HELP
- In the calculator mode or when edits printer format, if pressed, the display shows some help
descriptions.
- In the numeric or alphanumeric input phase, it enters, in this order, the following characters:
. , ; : # < > \
| ” % & / ( ) = ? ^ ’ [ ] { }
;
- HELP function, see section 4.1.4.
F1
- In the
<< F.Keys >>
step, if pressed for an instant, it is possible to set the default key functions.
- In the numeric or alphanumeric input phase, it allows to copy entered characters.
- If pressed for an instant, it enters into the CUSTOMER DATABASE.
- If pressed at length, it locks and unlocks the instrument’s keyboard (except the
C
key).
F2
- In the numeric or alphanumeric input phase, it allows to stick with copied characters.
- If pressed for an instant, it enters into the MATERIAL DATABASE.
- If pressed at length, the weight visualisation function with sensitivity x 10 is enabled
F3
- If pressed for an instant, it enters into the VEHICLE DATABASE.
- If pressed at length, one can adjust the date and time of the instrument.
F4
- If pressed for an instant, it allows to fill in the free texts, (only if configured).
- If pressed at length, it enters the instrument’s diagnostics menu.
F5
- If pressed at length, it locks/unlocks the tare.
- Commands the data transmission to the printer serial port.
F6
- If pressed for an instant, it starts the simple axle totalisation or the input axle totalisation (with
Input/Output function enabled).
- In the numeric or alphanumeric phase, it decreases the blinking digit.
- It allows scrolling ahead inside the menu steps or in the parameters within a step.
F7
- If pressed for an instant, it starts output axle totalisation (with Input/Output function enabled).
- In the numeric or alphanumeric input phase, it increments the blinking digit.
- It allows scrolling backwards in the menu steps or in the parameters within a step.
F8
- If pressed for an instant, it executes the printing and the zeroing of the partial total.
- In the numeric or alphanumeric input phase, it selects the digit to be modified from right to left.
F9
- If pressed for an instant, it allows to manually close the automatic axle totalisation cycle with
consequent determination of the total weight. See section 13.2.2, 13.2.3, 13.3.2 and 13.3.3.
- In the numeric or alphanumeric input phase, it selects the digit to be modified from left to right.
F10
- If pressed for an instant, it allows to reset the automatic axle totalisation cycle, cancelling all the
totalized axles. See section 13.4.1
- In the numeric or alphanumeric input phase, introduces a space between two characters.
NUMERIC
KEYBOARD
Entry of digits or characters.
- During weighing, these enter a numeric value with which it’s possible to:
1) Set the tare value, by pressing subsequently the
TARE
key (see section 7.2).
2) Sum, subtract, or multiply the value entered from the keyboard to the current tare (see the
15.3
CALCULATOR
section).
4.2 "2ndF" KEY: SECOND FUNCTION OF THE KEYS
In the weighing phase, by pressing the
2ndF
key together with another key, it’s possible to execute various functions
(continue reading the manual for the details of the functions):
2ndF
F1
Print/Clearing of Customer Total.
2ndF
F2
Print/Clearing of Material Total.
2ndF
F3
Print/Clearing of Vehicle Total.
2ndF
F4
Deselecting all the elements selected from the databases.
2ndF
F5
Repetition of the last printout made.
2ndF
F8
Net/Gross Conversion
2ndF
F9
Change LCD visualization
2ndF
C
Causes the display of the present metric scale information (see section 9).