49
VL.Pro.Owner’s.Manual
The.Edit.Preset.Menu
Pan
Pan is only available when the Tape Delay Type is selected and pans the effect at the
outputs in stereo mode. Negative values pan left, positive values pan right and +0 evenly
distributes the effect to the left and right channels. Range: L -99 to R +99
Smear
This parameter controls the amount of smear or signal degradation and frequency loss.
Particularly evident in the Tape Delay, the higher the setting, the more each delay repeat
loses intelligibility compared to the original signal.
This parameter is only available when the Tape Delay Type is selected.
Range: 0 to 99
High
Pass
Filter
Delay frequencies below this level are attenuated.
This parameter is not available when the Tape Delay Type is selected.
Range: Off (-) and 20Hz to 20.0 KHz
Low
Pass
Filter
Delay frequencies above this level are attenuated.
This parameter is not available when the Tape Delay Type is selected.
Range: 20Hz to 20.0 KHz and Off (-)
Ducker
Level
Ducker Level is the level you want the Delay Signal to be heard at when the Input Signal
is present. This provides attenuation (up to 18dB) of the delay signal while a performer
is singing or playing to help provide intelligibility. As the performance pauses, the delay
signal level returns to its normal setting. This parameter is not available when the Tape
Delay Type is selected. Range: -18dB to +0dB
Ducker
Thresh
The Ducker feature causes the Delay Repeats to attenuate (or get softer) by the
amount selected in the Ducker Level setting when an Input Signal is present. This allows
the delay to remain as an effect, and not clash with the original signal. The higher this
Ducker Threshold is set, the louder an input signal must be for the ducking to take
effect. This parameter is not available when the Tape Delay Type is selected.
Range: -70dB to +0dB
Ratio
Ratio is only available when the Ping Pong Delay Type is selected and adjusts the Stereo
Ratio (L:R) of the Ping Pong Delay Repeats (echoes) relative to the Delay Tempo.
Range: 1:12 to 12:1
Tap
Swap
Tap Swap is only available when the Ping Pong Delay Type is selected. Tap Swap works
in conjunction with the Delay Ratio and indicates the order in which the delays appear
in the stereo mix. Range: R,L or L,R
Edit Lexicon® Delay Table (Continued)