28
VL.Pro.Owner’s.Manual
Low
Cut
Low Cut
Low Cut is turned Off or On.
Frequency
All frequencies below specified Hertz are attenuated. Range: 60Hz to
120Hz
Tube
Preamp
Tube
Preamp
Tube Preamp, which provides mild distortion to give your vocals more
warmth, is turned Off or On.
Gain
Adjusts the preamp’s gain. Range: 0 to 99
De-Esser
De-Esser
De-Esser is turned Off or On.
Threshold
Sets the threshold above which to apply more gain reduction to sibilant
sounds. Range: -40dB to +0dB
The.Edit.Preset.Menu
1. Edit Pre-Effects
The following Preset Pre-Effects are applied in combination with both the Lead Effects and the
Harmony Voices.
Table Continued Next Page
For a depiction of the signal flow of the effects chain, see the Effects Flow diagram in the Block
Diagrams section on page 52.
the preset name are the function definitions for the Edit/Select knob. Upon Store screen entry,
they are defined as <Edit>-Character and <Select>-Toggle allowing you to change the character
that is currently selected.
2. Turn the Edit/Select knob to change the selected character. The available characters include blank,
numbers from 0-9, capital letter and lower case letters.
3. Press the Edit/Select knob to accept the current character value and change the Edit function to
<Edit>-Position allowing you to select a different character to edit.
4. Press the Edit/Select knob to toggle between the 2 edit functions and repeat the procedure until
the desired preset name is achieved.
5. When the desired preset name is achieved, Press the flashing Store button again.
6. The display will now present you with the Location to Store screen in the User Preset Bank. As
you scroll User Preset Bank locations with the Edit/Select knob, the stored preset names are
displayed in the highlighted area of the Store Screen, while the associated preset number flashes in
the Numeric Display. Note that storing to this User Preset location will overwrite the preset that
is currently stored there with the preset you are now storing.
7. Press the flashing Store button to finalize the Store procedure when the desired User Preset Bank
location is listed.
The.Edit.Preset.Menu
