38
VL.Pro.Owner’s.Manual
3.2.musIQ™.HARMONY
Mode
Main
The main musIQ Harmony Mode.
Alternate
This is an Alternate musIQ mode that follows the melody note changes in
the lead more closely than the main mode. For some songs, this mode will
produce an interesting alternative to the main musIQ mode, but because it
is more aggressive in following the lead melody, it can also produce some
unexpected harmonies.
3.3.SCALIC.HARMONY
These parameters are applicable to the Scalic Harmony Mode.
Root
Defines the root note or key of the scale for the Scalic Harmony Voices
Scale
Maj1 <Ionian>
Ionian Mode [1 2 3 4 5 6 7]
Maj2 <Ionian/135>
Ionian Mode but favors [1 3 5] notes in the scale
Maj3 <Mixolydian>
Mixolydian Mode [1 2 3 4 5 6
A
7]
Min1 <Aeolian>
Aeolian Mode [1 2
A
3 4 5
A
6
A
7]
Min2 <Dorian>
Dorian Mode [1 2
A
3 4 5 6
A
7]
Min3 <Harmonic>
Harmonic Minor Scale [1 2
A
3 4 5
A
6 7]
3.4.CHORDAL./.NOTES.HARMONY
These parameters are applicable to the Chordal, Notes and 4-Channel Notes Harmony Modes.
Note
Latch
Note Latch feature is turned Off or On. When Note Latch is On, the Note Attack and
Note Release parameters are not applicable as the Harmony Voices Attack and Release
times are automatically set to match those of the Lead Vocal.
When enabled in Chordal mode, the last chord played remains active after the notes
have been released from the MIDI keyboard.
When enabled in the Notes modes, the Harmony Voices will only respond to MIDI
note input when the number of notes being played equals or exceeds the number of
Harmony Voices enabled. This ensures logical voice assignment when the Harmony
Voices change.
Note
Attack
Controls how quickly the Harmony Voices begin. This parameter is only applicable
when the Note Latch is disabled. Range: 0ms to 4000ms (4 seconds)
Note
Release
Controls how quickly the Harmony Voices end. This parameter is only applicable when
the Note Latch is disabled. Range: 0ms to 4000ms (4 seconds)
The.Edit.Preset.Menu
