To latch F2 on:
While holding the Horn 2 Key
down press the PWR Key
then
release both keys simultaneously. The display will show the follow-
ing:
To release F2, press the Horn 2 key again.
10.2 Controlling Functions On Consisted Locomotives
Even though an individual locomotive is part of a consist and you can’t control
its speed and direction separately from the consist, you can still control its
function outputs independently as follows:
1. Press the LOCO Key
and select the address of the locomotive
that is a part of consist for which you want to control functions.
2. Press the LOCO Key
again to select the loco address to your
throttle. The speed value will show “cn” to remind you that you can
only control functions on the loco and not its speed.
3. Use the steps described above to turn on or off the functions on the
consisted loco.
4. When you are finished turning functions on or off for the consisted
loco, you can release the consisted loco from your throttle in prepa-
ration for running another loco address or you can leave it selected
on the throttle.
L O C O
L O C O
Function 2 is latched on for address 03
running on the R Throttle, the loco is running
at 25% speed. Note: When F2 is latched on,
the speed bar graph shows 100% to remind
you that F2 is latched. The loco's speed is
displayed in the text area.
PWR
22
38
