4.21 Full Numeric Keypad
26
4.22 Infrared Emitters
27
5.0 Track Power On/Off
27
5.1 Track Power On
27
5.2 Track Power Off
28
6.0 How To Select and Run Trains
28
6.1 The SEL Message
28
6.2 DCC Address Ranges & Display
28
6.3 Selecting An Address On A Throttle
29
6.4 Recall a Loco
31
6.5 Stealing: Forcing An Address Selection
32
6.5.1 Slot Following
33
6.6 “slot=max” Message
33
7.0 Locomotive Speed Control
34
8.0 Stop
34
8.1 Setting A Loco to Zero Speed
34
8.2 Emergency Stop
34
9.0 Locomotive Direction Control
36
10.0 Controlling Functions
36
10.1 Controlling F0-F12
36
10.1.1 Function 0 (F0)
37
10.1.2 Function 1, 3, 4, 5, 6, 7, 8, 9, 10, 11, & 12
37
10.1.3 Function 2 (F2)
37
10.2 Controlling Functions On Consisted Locomotives
38
11.0 Multiple Unit Operations
39
11.1 Adding a Locomotive To A Consist
39
11.2 Removing A Loco From A Consist
41
11.3 Nested Consisting
41
11.4 MU of Mismatched Locomotives
41
12.0 Releasing An Address From A Throttle
42
12.1 Dispatching addresses or consists
42
13.0 Programming and Configuration
43
13.1 Using the DT400’s key pad in Progamming Mode
44
13.2 Programming Mobile Decoder Addresses
45
13.3 How to Program Other Configuration Variables
47
13.3.1 Hex Display & Decimal Display
47
13.3.2 Programming CVs Other Than Addresses
48
13.4 Operations Mode Programming
50
13.5 Busy or Fail Message
51
13.5 Reading Back CV Values Programmed
52
14.0 How Your Command Station Manages Addresses
53
15.0 Decoder Status
54
15.1 Status Editing a Decoder
54
15.2 Note for Non-Digitrax Decoder Users
55
2
