Digital Projection
Titan Quad & Titan 800 Series
SIGNAL INPUTS AND OUTPUTS
Connection Guide
Conn 1
Rev F November 2012
Signal Inputs and Outputs
Rear Connection Panel
VGA
(input 1)
•
Use
Auto Setup
in the
Image/VGA Setup
menu. For more settings, see the
Operating Guide
.
HDMI
(input 2),
DVI
(input 3)
Analog or Digital DVI-I
•
Set
DVI-I Port
in the
Setup/Input Configuration
menu to choose between
Analog
and
Digital
. For more settings, see the
Operating Guide
.
SPDIF
•
Compatible audio sample packets on the
HDMI
input stream are decoded by the
projector and output on the
SPDIF
connector. This is a digital output.
3G-SDI
(input 4)
•
If two video streams are being transmitted, set
3G Level B Stream
in the
Setup/Input Configuration
menu to choose between the two streams.
CVBS1
(input 5)
•
Connect a
Composite Video
input signal to the BNC connector.
S-Video
(input 6)
•
Connect to the 4-pin mini-DIN connector.
Component
(input 7)
RGsB or RGBS
•
Set
Component Colour Space
in the
Setup/Input Configuration
menu to
RGB
.
•
Set
Component Sync Type
to
Auto
, except when the projector has problems
selecting between
3 Wire
(RGsB) and
4 Wire
(RGBS).
YPbPr
•
Set
Component Colour Space
in the
Setup/Input Configuration
menu to
YPbPr
.
CVBS2
(input 8)
•
Connect a
Composite Video
input signal to the RCA phono connector.
Component
DVI
VGA
HDMI
SPDIF
CVBS1
CVBS2
S-Video
3G-SDI
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see
Wiring
Details
later in this Guide.
See the next page for important
information about the differences
between the two connection panels.
Rear Connection Panel