Digital Projection
Titan Quad & Titan 800 Series
MENU MAP
Operating Guide
Op 28
Rev F November 2012
Main Menu
Sub Menus
Setup
Orientation
Desktop Front, Desktop Rear, Ceiling Front, Ceiling Rear
Latency
Lowest, Best Video
Input Configuration
DVI Boost EQ
Off, On
DVI / HDMI Color Space
RGB, YPbPr, Auto
DVI / HDMI Range
Full, Limited, Auto
DVI-I Port
Digital, Analog
DVI Main / SubOperation
Single Link A, Single Link B, Dual Link
DVI Main / Sub Range
Full, Limited
Component Color Space
RGB, YPbPr
Component Sync Type
3 Wire, 4 Wire, Auto
3G-SDI Level B Stream
Stream 1, Stream 2
Network
DHCP
Off, On
IP Address (
numeric input)
Subnet (
numeric input)
Information: DHCP Status, IP Address, Subnet, MAC Address
On Screen Display
Language
US English, UK English
Timeout
5 sec
, 10 Sec, 15 sec, 20 sec, 25 sec, 30 sec, infinite
Position
Center, Top Left, Top Right, Bottom Left, Bottom Right
Messaging
Off, On
System
Configuration
PIP, Edge Blend
Shutter Open
(command)
Shutter Close
(command)
Power On
(command)
Power Off
(command)
Reset Default Settings
(command)
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full detail.
The underlined text represents
the factory default value for each
setting.
Do NOT reset the settings unless
you are sure that you want to restore
ALL the current settings to their
factory defaults.
