Digital Projection
Titan Quad & Titan 800 Series
A TOUR OF THE MENUS
Operating Guide
Op 6
Rev F November 2012
Lens menu
Zoom
To move the lens in or out:
1. Select
Zoom In
or
Zoom Out
, then press
OK
.
2. When the image is the desired size, select
Zoom Stop
then press
OK
.
Focus
To adjust the focus:
1. Select
Focus Near
or
Focus Far
, then press
OK
.
2. When the image is correctly focussed, select
Focus Stop
then press
OK
.
Calibrate Zoom and Calibrate Focus
Each time a new lens is fitted into the projector, a calibration procedure must be carried out using these commands.
Before you use a newly fitted lens, select
Calibrate Zoom
and
Calibrate Focus
in turn and wait until the projector establishes minimum
and maximum travel distances. Select one command and allow at least 60 seconds for the calibration to take place, then select the other
command.
Center Lens
To center the lens, select
Center Lens
and press
OK
.
Nudge
To position the image correctly on the screen, use the
Nudge
controls.
Notes
Main Menu
Lens
You can also move the lens, focus
and zoom using the keypad:
•
Press
SHIFT
followed by
,
,
and
to shift the
lens up, down, left and right.
•
Press
FOCUS
followed by
and
to adjust the focus.
•
Press
ZOOM
followed by
and
to zoom in and out.
You can also calibrate zoom and
focus using the keypad:
•
Press
RPY
followed by
to calibrate the lens zoom
mechanism.
•
Press
RPY
followed by
to calibrate the lens focus
mechanism.
Main Menu
Lens
Nudge
