Digital Projection
Titan Quad & Titan 800 Series
A TOUR OF THE MENUS
Operating Guide
Op 21
Rev F November 2012
System
•
Configuration
: switch between
PIP
and
Edge Blend
.
The other settings in this menu are provided mainly to allow control from the Web Configuration Utility.
•
Use the
Shutter Open
and
Shutter Close
commands as required.
•
Use the
Power Off
command to set the projector into
Standby
mode.
Notes
Main Menu
Setup
System
When you switch between
PIP
and
Edge Blend
, the projector will
reboot instantly to enable the new
setting.
The
Power On
command has no
function when seen on the projector
OSD.
However, it can be used from
the
Web Configuration Utility
described at the end of this guide.
Both the keypad and remote control
have dedicated buttons allowing
access to the
Shutter Open
,
Shutter Close
,
Power On
and
Power Off
commands.
