Digital Projection
Titan Quad & Titan 800 Series
3D SETUP
Reference Guide
Ref 49
Rev B November 2012
3D Setup
In most situations you can use the
Auto
setting to have the projector automatically detect the format. Otherwise, consider the notes below to
help you set up the 3D input manually.
The following 3D formats are supported:
•
Sequential
Main
will accept frame rates up to 160Hz. Lower frame rates can be multiplied for display. An example would be 60Hz (30 frames per eye
in Left-Right sequence (L1, R1, L2, R2…) with
Frame Rate Multiplier
set to 2x, resulting in a displayed sequence at 120Hz (L1, R1, L1,
R1, L2, R2, L2, R2…).
Sub
can accept frame rates up to 60Hz and frame-multiply in a similar manner.
Frame Rate Multiplier
should never be set to result in a displayed frame rate above 160Hz - doing so will result in an image error.
For sequential 3D, an external sync is required to identify left and right frames. If no sync is available from the sequential source, the
projector will generate an output sync, but it may then be necessary to manually reset the dominance each time the player is started.
•
Dual Pipe (LEFT and RIGHT)
The left and right eye images are delivered on two separate DVI links, which the projector will interleave for 3D display.
Notes
3D may not be present on some
models
L
R
L
R
Sequential
L
R
Dual Pipe
MAIN input
SUB input
