Digital Projection
Titan Quad & Titan 800 Series
SIGNAL INPUTS AND OUTPUTS
Connection Guide
Conn 3
Rev F November 2012
3D Connections
3D sources up to 60Hz requiring frame doubling and left/right interleaving
•
Connect to any of the Inputs on the
Rear Connection Panel
.
•
Set
3D Type
in the
3D
menu to
Auto
, except when the projector has problems
selecting between
Sequential
,
Frame Packing
,
Top-and-Bottom
and
Side-by-Side
(Half)
.
3D sources above 60Hz not requiring frame doubling
•
Connect to either of the Inputs on the
Side Connection Panel
.
•
Set
3D Type
in the
3D
menu to
Auto
, except when the projector has problems
selecting between
Sequential
,
Frame Packing
,
Top-and-Bottom
and
Side-by-Side
(Half)
.
Dual Pipe 3D
•
Connect to both of the Inputs on the Side Connection Panel.
•
Input 9
(DVI) is the
left
image, and
Input 10
(DVI/HDMI) is the
right
image.
3D Sync in
•
Sync input signal.
3D Sync out
•
Sync output signal. This may be affected by the
Sync Offset
and
Output Sync Polarity
settings in the
3D
menu.
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see
Wiring
Details
later in this Guide.
3D Sync in
3D Sync out
Side Connection Panel
DVI/HDMI
Input 10
together:
Dual Pipe 3D
DVI
Input 9
Sync in
Video
3D Server
Sync
Projector
Sync out
3D glasses or
Z screen
