Digital Projection
Titan Quad & Titan 800 Series
SCREEN REQUIREMENTS
Reference Guide
Ref 20
Rev B November 2012
Positioning the screen and projector
For optimum viewing, the screen should be a flat surface
perpendicular to the floor. The bottom of the screen should
be 1.2m (4 feet) above the floor and the front row of the
audience should not have to look up more than 30° to see
the top of the screen.
The distance between the front row of the audience and
the screen should be at least twice the screen height and
the distance between the back row and the screen should
be a maximum of 8 times the screen height. The screen
viewing area should be within a 60° range from the face of
the screen.
Notes
The projector should be installed
as close to the power outlet as
possible.
The power connection should be
easily accessible, so that it can
be disconnected in an emergency.
Ensure that there is at least
30cm (12in) of space between the
ventilation outlets and any wall,
and 10cm (4in) on all other sides.
Do not install the projector close
to anything that might be affected
by its operational heat, for
instance, polystyrene ceiling tiles,
curtains etc.
The image can be flipped for rear
projection (see the
Operating
Guide
) and displayed without the
need for extra mirrors or equipment.
However, you must ensure that
there is sufficient distance behind
the screen for the projector to be
correctly located.
Rear installation is generally more
complicated and advice should be
sought from your local dealer before
attempting it.
