Digital Projection
Titan Quad & Titan 800 Series
A TOUR OF THE MENUS
Operating Guide
Op 15
Rev F November 2012
3D menu
•
Set
3D Enable
to
On
or
Off
as required.
•
Use the
Frame Rate Multiplier
to reduce flicker when the incoming 3D video signal has a low
frame rate.
For example, a 48Hz frame rate could be tripled to 144Hz.
•
3D Type
should be set to
Auto
, except when the projector has problems selecting between
Sequential
,
Frame Packing
,
Top and Bottom
and
Side by Side (Half)
.
•
Set the
Dark Time
to reduce the ghosting that can be caused by the images overlapping whilst
the glasses are switching.
•
Set the
Sync Offset
to compensate for signal processing delays in the projector.
•
Set the
Output Sync Polarity
to suit the glasses, or if the left and right images appear to be
swapped.
•
Set
Source Dominance
to
Left
or
Right
to suit the incoming 3D video signal.
L
R
Frame Packing
L
R
Top-and-Bottom
L
R
Side-by-Side (Half)
L
R
L
R
Sequential
Notes
Main Menu
3D
Set the
Dark Time
to the value
appropriate to the glasses or
ZScreen.
Adjust the
Sync Offset
to eliminate
ghosting and achieve a smooth
grayscale.
For additional information on 3D
settings, see the
Reference Guide
.
The information on this page does
not apply to 2D projectors.
