INSIGHT 4K LASER User Manual
1.3.
Names of Projector Parts
1.3.1.
Front of the projector
1. Air inlet / Air filter
Do not cover.
An air filter is attached over the air inlet to prevent dust..
2. SYSTEM status indicator
Indicates the status of the projector. When the projector is operating normally, the SYSTEM status indicator lights/blinks in green or orange.
When an error occurs, it lights/blinks in red. When an error occurs, check the contents of the display on the LCD screen.
3. LIGHT status indicator
Displays the status of the light source. The indicator turns on when the light source is on and turns off when the light source is off.
4. Lens (optional)
Images are projected from the lens. Request your dealer/distributor to install or replace the lens.
5. Air outlet
Do not cover.
1.3.2.
Rear of the projector
6. Air inlet / Air filter
Do not cover.
Two filters are attached over the air inlet to prevent dust.
7. Air outlet
Do not cover.
8. AC input and main power switch
While AC power is being supplied, set the main power switch to ON position, then your projector will enter a standby state.
Connects to the AC power cable. The AC power cable is not an accessory. Consult with your dealer/distributor about the AC power cable.
9. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of projected screen.
10. Connection terminals
Various image signal cable are to be connected here.
You can expand signal input terminals by installing the optional signal input board (NC-80LB01-B/NC-80DS01-B). Contact your
dealer/distributor for more information on separately sold optional products.
11. Adjustable feet
Do not cover the air inlets and outlet while the projector is in operation. Insufficient ventilation leads to a rise of the internal
temperature and may cause a fire or malfunction.
Page
16
of
65
