INSIGHT 4K LASER User Manual
3.2.
Turning your projector on
Preparation:
• Connect the power cable to the projector.
• Supply AC power to the projector.
Turn off the main power switch to the projector when supplying or cutting AC power to the projector. Supplying or
shutting down the AC power while the main power switch is on will damage the projector.
Turning on and off the projector involves a two-step operation; the “main power switch” and the “POWER button”.
Turning power on:
[1] Turn on the “main power switch” of the projector.
Your projector is set in a standby state.
[2] If KEY LOCK is on, press the KEY LOCK button for one second or longer.
KEY LOCK is off and buttons on the control panel become operable.
[3] Press the POWER button three seconds or longer.
Your projector is now switched on.
Turning power off:
[1] Press the POWER button three seconds or longer.
Your projector is set in a standby state.
[2] Turn off the “main power switch” of the projector.
Your projector is turned off.
1)
Turn on the main power switch on the side of the projector.
A buzzer will ring on the projector. The POWER button indicator will blink green and the SYSTEM status indicator will light orange (standby
state). KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30 seconds by default.
Buttons on the control panel do not function while KEY LOCK is on.
2)
If KEY LOCK is on, press the KEY LOCK button for one second or longer.
KEY LOCK becomes off. The KEY LOCK button indicator turns off and buttons on the control panel become operable.
3)
Press the POWER button on the control panel of your projector three seconds or longer.
Your projector is turn on.
Page
24
of
65
