INSIGHT 4K LASER User Manual
1.3.5.
Control panel
1. LCD display
Displays menus and setting values for the projector operations
2. KEY LOCK button (with indicator)
Locks and unlocks the control panel.
Press and hold for one second or longer to switch between locked and
unlocked state.
KEY LOCK becomes automatically ON if no control panel operation
takes place in the standby state for 30 seconds by default.
3. Arrow buttons
Navigate through the menus.
4. MENU button
Shows the list of menus on the LCD display. (See page 40)
5. ENTER button
Selects a menu item.
6. IMB button (planned to be supported in a future update)
This button is operable when the media block is installed in the projector. Press
to display the operation menu of the media block.
7. LIGHT button
Displays the light source adjustment menu.
8. PLAY / PAUSE button (planned to be supported in a future
update)
This button is operable when the media block is installed in the projector. Press to play or pause the image contents.
9. POWER button (with indicator)
Press this button for more than three seconds to turn on or off (standby) the projector.
In order to start up the projector, turn on the main power switch for the projector to set the projector in the standby state.
10. EXIT button
Navigates to the previous menu item.
11. DOUSER button (with indicator)
Opens and closes the douser.
12. LIGHT ON / OFF button (with indicator)
When pressed and held for five seconds or longer when the projector is on, the light source is switched on and off.
13. STOP button (planned to be supported in a future update)
This button is operable when the media block is installed in the projector. Press to stop playing the image contents.
14. Preset buttons 1 to 8 (with indicators)
Press the preset button to select a title (input signal) assigned to each button. Up to 100 titles (input signals) can be registered to this projector, and
any 16 titles from them can be assigned to the preset button. Request your dealer to register and change the titles of the buttons as required.
The preset button indicators show their assigned title or selection status.
To select a title allocated to one of the preset buttons, use the following procedure.
To select a title allocated to one of “Preset Button1” to “Preset Button8”, press the button which corresponds to the number of the
preset button (button <1> to <8>).
For example, press the <1> button to select the “Preset Button1” or press the <8> button to select the “Preset Button8”.
To select a title allocated to one of “Preset Button9” to “Preset Button16”, press the preset button (button <1> to <8>) while holding
down the UP button.
For example, press the <1> button while holding down the UP button to select the “Preset Button9” or press the <8> button while
holding down the UP button to select the “Preset Button16”.
Page
19
of
65