Digital Projection Insight Laser 4K User Manual Download

Page: 54 / 65

INSIGHT 4K LASER User Manual

6.2.5.

LIGHT ON/OFF button

Indicator condition

Projector condition

Note

Off

The light source is off.

Steady light

Green

The light source is on.

6.2.6.

Indicators

1. LIGHT status indicator

Indicator condition

Projector condition

Note

Off

The light source is off.

Steady light

The light source is on.

2. SYSTEM status indicator

Indicator condition

Projector condition

Note

Off

Main power is off.

Blinking light

Green

The projector is getting ready to turn on.

The douser is closed.

The light source is off.

Wait for a moment.

Orange

The projector is cooling down.

Wait for a moment.

Red (With buzzer)

Safety problem, error.

An error message is displayed in

the LCD screen.

Check the content of the error.

Red (Without buzzer)

Error with possible image project under certain

conditions.

Steady light

Green

The projector is turned on.

Orange

The projector is in standby.

Red

Error at a level with not affect on projection.

An error message is displayed in

the LCD screen.

Check the content of the error.

Page

Summary of Contents for Insight Laser 4K

































































Search results

Summary of Contents for Insight Laser 4K

Reviews:

Related manuals for Insight Laser 4K

Brands by name

Popular brands

Digital Projection Insight Laser 4K, User Manual

Search results

Summary of Contents for Insight Laser 4K

Reviews:

Related manuals for Insight Laser 4K

Brands by name

Popular brands