INSIGHT 4K LASER User Manual
4. Using Menus
4.1.
Basic operation with adjustment menus
To adjust the projector, display the menu on the LCD screen of the projector control panel.
4.1.1.
Screen display
The menu display screen is composed of a menu display field (the upper two lines) and a setting item display field (the bottom two lines).
←
Displays the main menu or submenus.
←
Displays submenus or selection items.
←
Displays settings and selection status.
←
Displays settings, selected items and information on selected menus.
The meanings of symbols in the menu display screen are outlined below.
Indicates that there is a menu of a higher level.
Press the UP button to return to a menu one level above.
Indicates that there is a selected item or menu at the same level.
Press the LEFT/RIGHT button to display other selected items or menus.
Indicates that there is a menu of a lower level.
Press the DOWN button to display the menu one level below.
Indicates that there are setting items of a higher or lower level.
Press the UP button to return to a menu one level above.
Press the DOWN button to display the setting item one level below.
When not displaying menus, the following screen is normally displayed.
When the projector is in a standby state (the main power switch in on), the following is displayed.
When the power is turned on, the following is displayed.
←
Displays the hours of light source use.
←
Displays the value of the light source output setting (%).
←
Displays the selected title.
←
Displays the selected video input port.
When power is turned on
When in standby
Page
33
of
65
