INSIGHT 4K LASER User Manual
•
Using GPIO Control
You can use GPIO control for the projector’s health check and error check. Also, you can use the output as the trigger to control external devices.
The following functions are assigned to the pin number 13-32, 14-33, 15-34, and 16-35 (EXT_GPOUT1 - EXT_GPOUT4) as the default. You can
change the assigned functions.
Pin No.
Photo-coupler ON/OFF
Function
9-28
ON/OFF
External 3D L/R timing signal output ON/OFF
10-29
–
System reserved (used internally)
11-30
–
System reserved (used internally)
12-31
ON/OFF
Internal 3D L/R timing signal output ON/OFF
13-32
ON/OFF
GPIO control status check
ON: GPIO control (input) is unavailable.
OFF: GPIO control (input) is available
14-33
ON/OFF
Error check
ON: Error
OFF: No error
15-34
ON/OFF
IMB status check
ON: The content is being played.
OFF: The content is stopped/paused
16-35
ON/OFF
Health check (heart beat)
ON and OFF are alternately output when operations are
normal
GP I/O C
t
I
id P j
t
Ext_GPOUT_P
Ext_PROJ_GOOD_P
Pin No.: 9 10 11 12 13 14 15 16
Absolute Maximum Rating: 50 mA
Ext GPOUT N
Ph t
l
Output Connector
Page
62
of
65