DG-LB1054UV User Manual
82
1.
L2TP Client Name:
The name of this rule.
2.
Interface:
Select the interface from the drop down list.
3.
Operation Mode:
Supports “Always on”.
4.
L2TP Over IPsec:
L2TP over IPSec VPNs allow you to transport data over the Internet,
while still maintaining a high level of security to protect data. Enter a Pre-sharekey when
you use some devices, like Apple related mobile devices to establish L2TP tunnels.
5.
Remote LNS IP/FQDN:
Enter the IP/FQDN of the remote PPTP server.
6.
User Name:
The user name which is provided by remote L2TP server.
7.
Password:
The password which is provided by remote L2TP server.
8.
Tunneling Password:
Enter the tunneling password.
9.
Default Gateway/Remote Subnet:
You can check the “Enable” checkbox to set this
tunnel as the default gateway for WAN connection.
10.
Authentication Protocol:
You can choose authentication protocol as PAP, CHAP,
MSCHAP(v1), or MSCHAP(v2). The protocol you choose must be supported by remote
L2TP server.
11.
MPPE Encryption:
If you enable MPPE, then this L2TP tunnel will be encrypted.
12.
NAT before tunneling
:
It can go to access the Server internal data.
13.
LCP Echo Type:
Choose the way to do connection keep alive.
14.
Service Port: Enter the service port.
Click on “Save” to store what you just select or ”Undo” to give up.
