DG-LB1054UV User Manual
20
certain WAN interface as a “
Fail over
” WAN, you have to further identify which WAN
interface(s) is to be failover and fallback.
3.
Line Speed
: You can specify the downstream / upstream speed (Kbps) for the
corresponding WAN connection. Such information will be referred in QoS and load
balance function to manage the traffic load for each WAN connection.
4.
VLAN Tagging
: If your ISP required a VLAN tag been inserted into the WAN packets,
you can enable this setting, and enter the specified tag value.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
3.1.1.2 Internet Setup
There are two or three physical WAN interfaces that you can configure one by one to get
proper internet connection setup. They include the Ethernet WAN(s) - the DSL ISP
(Dynamic IP, Static IP, PPPoE, PPTP and L2TP connection) and the Wireless WAN - the
remote wireless ISP such as 3G/4G (LTE, HSPA+, HSPA, WCDMA, EDGE, GPRS).
