DG-LB1054UV User Manual
81
3.
Server Virtual IP:
The IP address of L2TP server. This IP address should be different
from IP address of PPTP server and LAN subnet of VPN gateway.
4.
IP Pool Starting Address:
This device will assign an IP address to remote L2TP client.
This value indicates the beginning of IP pool.
5.
IP Pool Ending Address:
This device will assign an IP address to remote L2TP client.
This value indicates the end of IP pool.
6.
Authentication Protocol:
You can choose authentication protocol as PAP, CHAP,
MSCHAP(v1), or MSCHAP(v2).
7.
MPPE Encryption :
Check this checkbox to enable MPPE encryption. Please note that
MPPE needs to work with MSCHAP-v1 or MSCHAP-v2 authentication method. You can
choose encryption length of MPPE encryption.
8.
Service Port:
Enter the service port.
9.
L2TP Server Status:
The connected L2TP user & connection information will be shown
in this table.
10.
User Account List:
You can input upto 10 different user accounts for the L2TP server.
Click on “
Save
” to store what you just select or “
Undo
” to give up
3.2.3.3.2 L2TP Client
1.
L2TP Client Configuration:
Enable or Disable L2TP client function.
2.
L2TP Client List & Status:
You can input upto 10 different user accounts for L2TP
clients,
and define each user account settings by clicking on the corresponding “Edit”
button and then check the “Enable” checkbox to enable it.
