DG-LB1054UV User Manual
79
3.
PPTP Client Name:
The name of this rule.
4.
Interface:
Select the interface from the list.
5.
Operation Mode:
Support “Always on”
6.
Remote IP/FQDN:
Enter the IP/FQDN of the remote PPTP server.
7.
User Name:
The user name which is provided by remote PPTP server.
8.
Password:
The password which is provided by remote PPTP server.
9.
Default Gateway/Remote Subnet:
You can check the “Enable” checkbox to set this
tunnel as the default gateway for WAN connection.
10.
Authentication Protocol:
You can choose authentication protocol as PAP, CHAP,
MSCHAP(v1), or MSCHAP(v2). The protocol you choose must be supported by remote
PPTP server.
11.
MPPE Encryption:
If you enable MPPE, then this L2TP tunnel will be encrypted.
12.
NAT before tunneling
:
It can go to access the Server internal data.
13.
LCP Echo Type:
Choose the way to do connection keep alive.
