DG-LB1054UV User Manual
44
When “PPPoE” is selected you need to do the following settings:
1.
Account:
Enter the Username that you got from your ISP
WAN IPv6 address settings:
2.
Password:
Enter the Password that you got from your ISP
3.
Service Name:
Enter the Service Name that you got from your ISP
4.
Connection Control:
Leave the setting as “Auto Reconnect (always-on)”
5.
MTU (Maximum Transmission Unit):
Most ISP offers MTU value to users. The default
MTU value is 0 (auto).
6.
MLD Snooping:
Multicast Listener Discovery (MLD) is a component of the Internet
Protocol Version 6 (IPv6) suite. MLD is used by IPv6 routers for discovering multicast
listeners on a directly attached link, much like IGMP is used in IPv4.
7.
LAN IPv6 address settings
: Please enter “LAN IPv6 address” and ignore the “LAN
IPv6 Link-Local address”.
8.
Auto-configuration:
Disable or enable this auto configuration setting.
Address auto configuration settings:
9.
Auto-configuration type:
You may set stateless or stateful (Dynamic IPv6).
10.
Router advertisement Lifetime:
You can set the time for the period that the router send
(broadcast) its router advertisement. Each router periodically multicasts a Router
Advertisement from each of its multicast interfaces, announcing the IP address(es) of that
interface. Hosts discover the addresses of their neighboring routers simply by listening
for advertisements. When a host attached to a multicast link starts up, it may multicast a
Router Solicitation to ask for immediate advertisements, rather than waiting for the next
periodic ones to arrive; if and only if no advertisements are forthcoming, the host may
retransmit the solicitation a small number of times, but then must desist from sending any
more solicitations. Any routers that subsequently start up, or that were not discovered
because of packet loss or temporary link partitioning, are eventually discovered by
reception of their periodic (unsolicited) advertisements.
