DG-LB1054UV User Manual
35
If you choose the “
By User Policy
” strategy, you have to further create the expected policies one
by one. Click the “
add
” button to add your load balance policy.
You can manage the outbound traffics flow and the force specific traffics to access Internet
through designated WAN interface. For those traffics not covered in the user policy rules, the
device will allocate the WAN interface by applying “Smart Weight” mechanism simultaneously.
1.
Source IP Address
: Enter the expected Source IP Address for the load balance policy. It
can be “Any”, “Subnet”, “IP Range”, or “Single IP”. Just choose one type of the source
IP address, and specify its value as well. If you don’t want to specify a certain source IP
address for this policy, just leave it as “Any”.
2.
Destination IP Address
: Enter the expected Destination IP Address and / or the Port
number for the load balance policy. It can be “Any”, “Subnet”, “IP Range”, “Single IP”,
or “Domain Name”. Just choose one type of the destination IP address, and specify its
value as well. If you don’t want to specify a certain destination IP address for this policy,
just leave it as “Any”
3.
Destination Port
: Enter the expected Destination Port number for the load balance policy.
It can be “All”, “Port Range”, “Single Port”, or “Well-known Applications”. Just choose
one type of the destination port, and specify its value as well. If you don’t want to specify
a certain destination port for this policy, just leave it as “All”
4.
Protocol
: Enter the expected protocol type for the load balance policy. It can be “TCP”,
“UDP”, or “Both”. If you don’t want to specify a certain protocol type for this policy, just
leave it as “Both”
5.
WAN Interface
: Identify which WAN interface is to be selected for accessing the Internet
if all of above source and destination criteria are matched for the outbound traffics.
6.
Policy
: Enable or disable this user policy.
