DG-LB1054UV User Manual
23
Static IP Address
Select this WAN type to give your static IP information. You will need to enter in the IP
address, subnet mask and gateway address, provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which is four IP octets separated by a
dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
1.
WAN IP address / Subnet Mask / Gateway:
Enter the IP address, subnet mask, and
gateway address, provided to you by your ISP.
2.
Primary DNS / Secondary DNS:
Input the Primary/Secondary DNS if necessary.
3.
MTU
: Most ISP offers MTU value to users. The default value is 0 (auto)
4.
NAT:
If you enable this option, it will act with a non-NAT function.
5.
IGMP Snooping:
Enable or disable IGMP snooping function. If you enable the IGMP
snooping function, this device will detect all IGMP messages exchanged on the link and
will maintain a table indicating for each of the interfaces, what multicast groups should
be forwarded. This simple solution easily prevents multicast flooding on an Ethernet link.
6.
WAN IP alias
: The device supports 2 WAN IP addresses for a physical interface, one is
for primary connection that provides users/devices in the LAN to access
Internet; the
other is a virtual connection that let remote user to manage this device.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
