DG-LB1054UV User Manual
100
1.
Go to
Start > Right click on “My Computer” > Properties
.
2.
Select
the
Hardware Tab
.
3.
Click
Device Manager
.
4.
Double-click on “
Network Adapters”
.
5.
Right-click on
Wired Card bus Adapter
or
your specific network adapter
.
6.
Select
Properties
to ensure that all drivers are installed properly.
7.
Look under
Device Status
to see if the device is working properly.
8.
Click “
OK”
.
2
What can I do if my Ethernet connection does not work properly?
1. Make sure the RJ45 cable connects with the router.
2. Ensure that the setting on your Network Interface Card adapter is “Enabled”.
3. If settings are correct, ensure that you are not
using a crossover Ethernet cable, not all
Network Interface Cards are MDI/MDIX compatible, and use a patch cable is
recommended.
4. If the connection still doesn’t work properly, then you can reset it to default.
3
How to reset to default?
1.
Ensure the load balancing Router is powered on
2.
Find the
Reset
button on the right side
3.
Press the
Reset
button for 8 seconds and then release.
4.
After the Router reboots, it gets back to the factory
default
settings.
This product comes with One Year warranty. For further details about warranty policy and Product
Registration, please visit support section of
www.digisol.com
