UTM-00330
|
Rev 5
Page
13
of
91
DetNet South Africa Copyright © 2019
The Harness wire terminals are used to connect to the lead-in harness wires.
The 2-Wire connector is used to connect a single DigiShot
®
Plus detonator while testing and tagging holes.
STATUS LED – A Blue circular LED which indicates successful tests or operations result status.
CHARGE LED – A White DetNet Swirl shaped LED which indicates that the Tagger is charging.
ERROR LED – A Red triangular LED which indicates when an error is present.
The LCD screen displays 128x128 pixels. Heating of the LCD will be necessary if the device is used in
environments where the temperature drops below -15°C, the internal heater pad will automatically switch on to
warm the display.
The Soft Keys will activate functions that appear at the bottom of the LCD screen, above the
corresponding Soft Key, as an option in a menu.
The Yellow arrows are the Navigation keys. They are used to navigate during actions
where you may need to move left, right, up or down in an active screen.
The Up and Down Navigation Keys can increase and decrease values in some
screens.
The Numerical keys are used to enter numerical values and to make selection from
the list of commands or menus.
The Enter key is used to accept an on-screen activity/option.
The Backspace key is used to delete the character to the left of the cursor.
The
ESC
key is used to cancel and escape out of selected options.
